Dallas, TX · Open 7 AM to 10 PMCall: (469) 264-8319

Garage Door Repair Services

Diagnosis first, then the fix — for doors that grind, sag, stall or stop answering the remote.

Garage door repair means finding the part that failed and fixing that part, not adjusting the opener until the symptom fades. The springs and lift cables carry the door's weight; the opener's job is to move a door that already balances. When a door grinds, jerks or stops, the cause is usually a worn roller, a frayed cable, a weak spring, a bent track or a cracked hinge.

We start with the door disconnected from the opener. A balanced door will hover at the 3-to-4-foot mark when you let go, a check that DASMA and the opener maker Chamberlain both describe. A door that drops or climbs has a spring or cable problem, and we deal with that before we touch the opener. Then we inspect the hinges, rollers, tracks, bottom seal, travel limits and photo-eyes.

The truck carries common springs, cables, rollers, hinges and sensor parts, so most repairs finish on the first visit. We explain what failed and give the exact quote on site before any work starts.

What Brings Most Repair Calls

  • A grinding or squealing sound follows the door up and down.
  • The door quits halfway and has to be pulled the rest of the way.
  • Looking from the driveway, one end of the bottom edge sits lower.
  • Travel is jerky, with a shudder at the curve of the track.
  • The motor runs for a while yet the door creeps only inches.
  • Some mornings the remote works and some mornings it does nothing.

Heat, Freezes and Wide Temperature Swings

Dallas has a wide temperature range. Love Field's 1991 to 2020 normals show an average summer high of 95.5°F and about 108 days a year at 90°F or higher, followed by about 23 nights a year at or below freezing. The National Weather Service describes the winters as mild but changeable, with periodic cold fronts. Seals, lubricants and moving parts take that swing every year, so on a repair visit we also look at the bottom seal for cracking, the rollers for dry or flat-spotted wheels, and the cable ends for fraying.

Technician on one knee adjusting a bottom bracket, red toolbox beside him
Technician on a stepladder with new track pieces laid on the floor
Technician kneeling on a drop cloth laying out a torsion spring shaft

From Your Call to a Tested Door

Step 1

Tell us what you see and hear

A person answers from 7 AM to 10 PM and asks what the door does: where it stops, what it sounds like and whether the opener runs. That tells us which parts to bring.

Step 2

We find the failed part

The crew disconnects the opener and checks the balance by hand, then inspects the springs, cables, rollers, hinges, tracks, seal and sensors. We show you the part and say why it failed.

Step 3

Exact quote, then the repair

We name the price for each fix and wait for your go-ahead. After you approve it, we replace or adjust only what failed and tell you about anything else we saw.

Step 4

Test before we leave

We check the balance again, run the door through full travel, and test the opener's safety reversal and photo-eyes. The door leaves our hands working.

What a Repair Visit Costs

Garage Door Spring Replacement per spring
From $150
Garage Door Cable Replacement per cable
From $150
Roller Replacement per set
From $120
Track Repair & Off-Track Door per door
From $150
Diagnostic Service Call $0 with a completed repair
$0

Figures shown are where each job starts. Your door's weight, the parts it takes and the grade of hardware set the final number, which you see and approve at the house first.

Get My Exact Quote All prices →

Repair Questions From Dallas Homeowners

My door refuses to open at all. Where do we start looking?
A garage door that will not open usually has no power, a broken spring, a lift cable that has come off, or an opener that has been disconnected or has failed. Check the outlet, the wall button and the remote battery first. If you heard a bang, or the opener runs but the door stays shut, a spring has probably broken, so do not force the door.
Why does the door touch the floor and then head back up?
A door reverses before it closes when the opener senses something in the way: a blocked or misaligned photo-eye, an obstruction, a track that binds, or travel and force limits set wrongly. Clear the doorway, wipe both sensor lenses and check that the two sensors face each other. If the door still reverses, the cause is mechanical and we find it.
Is there a quick way to check whether the door is balanced?
With the door closed, use the red release handle to detach the opener, lift it by hand to the 3-to-4-foot mark, then take your hands away. A balanced door hovers where you left it. The Consumer Product Safety Commission warns that a severely unbalanced door can crash to the floor, so keep clear of it. If the door drops or rises, call a trained technician.
What makes one door so much louder than the neighbor's?
Grinding or squealing points to dry or worn rollers and hinges, rattling to loose hardware, and a loud hum to the opener. DASMA's roller experts note that nylon rollers are a lot quieter than steel ones. We listen with the door disconnected and then with the opener running, because noise that appears only with the opener on is an opener problem.
With the power off, can the door still be raised by hand?
Yes, if the springs are intact and the door is balanced. With the door closed, use the red release handle and then raise the door by hand. If a spring has broken, DASMA's checklist says to leave the door unused until the spring is replaced, because the door may be too heavy to hold.
Contact Us

Reach the Sherry Lane Garage Door Desk

Describe the noise, the stuck spot or the part that snapped, and a technician from our Preston Center office phones you back. Jobs start at the figures on the price list; the number for your own door is settled at the house, before anything comes apart.

Reunion Garage Door Repair Expert of Sherry
5956 Sherry Ln 20th Floor
Dallas, TX 75225

Phone: (469) 264-8319
Email: info@reuniongaragedoorrepairsherry.com
Hours: Open 7 AM to 10 PM, 7 days a week

Get My Free Estimate ☎ Call (469) 264-8319

Your name and number are used only to return your call, as set out in our Privacy Policy.

☎