Dallas, TX · Open 7 AM to 10 PMCall: (469) 264-8319

Garage Door Roller Replacement

Worn wheels swapped for sealed-bearing nylon or steel rollers, with the track tuned for quiet travel.

☎ Call (469) 264-8319Free On-Site Quote

Garage door roller replacement puts new wheels in the hinges so the door runs smoothly in its tracks. A roller has a wheel and a stem; the stem fits into a hinge at the edge of a section, and the wheel rides in the track. DASMA's glossary defines a long-stem roller as one with a shaft seven inches or longer, so the stem has to match the hinge. A cracked, flat-spotted or loose wheel grinds, wobbles and can jump out of the track.

We choose by weight, not by looks. DASMA's roller experts say suppliers publish a weight rating for each roller, with 50 pounds per roller for 10,000 cycles given as one example for a nylon roller without bearings. Bearingless nylon suits a light door that cycles twice a day, while a heavy carriage door should have bearing rollers. Nylon is a lot quieter than steel.

We replace the rollers on both sides, work carefully at the bottom corners because those brackets hold cable tension, and test the door through a full cycle.

Rollers That Are Wearing Out

  • The track gives off a scraping, grinding sound as the door moves.
  • A wheel on one of the rollers is chipped or split.
  • The whole door rattles in its tracks on every trip.
  • One roller has popped out of the track altogether.
  • The door is noticeably louder than it was a year ago.
  • Right at the curve in the track, the door lurches.

Wide Doors on Rebuilt Houses

In our experience Dallas houses rebuilt over the last 30 years often have wide double doors, and a wide insulated door weighs far more than the light single door of a 1950s garage. The rollers carry that weight for years, and heat adds wear: Love Field averages about 22 days a year at 100°F or higher. Dry bearings and hardened grease are, in our experience, where roller noise starts. We fit rollers rated for the door's actual weight, and we ask when the door was last painted or insulated, because both add weight.

Technician holding a worn roller next to a new one
Technician guiding a tan sectional door along its tracks
Technician working on the vertical track beside a door window

How a Roller Swap Is Done

Step 1

Tell us what you hear

A person answers and asks about scraping, shaking or a wheel that has moved. Those details tell us which roller type and stem length to bring.

Step 2

Inspect and quote

The crew checks the wheels, stems, hinges and tracks and weighs the door. We give the exact quote on site before any work starts.

Step 3

Replace the rollers

With your approval, we fit rollers that match the hinges and the door's weight. We work carefully at the bottom brackets, which hold cable tension.

Step 4

Run the door

We cycle the door several times and check the balance and track clearance. Then we test the safety reversal.

Roller Replacement Prices

Roller Replacement per set
From $120
Diagnostic Service Call $0 with a completed repair
$0

Figures shown are where each job starts. Your door's weight, the parts it takes and the grade of hardware set the final number, which you see and approve at the house first.

Get My Exact Quote All prices →

Roller Questions

Nylon wheels or steel ones: which suit our door better?
Nylon rollers are a lot quieter than steel, according to DASMA's roller experts, and Clopay adds that steel is more durable but noisier. The right pick depends on the door's weight: bearingless nylon suits a light door, and a heavy door should have ball-bearing rollers. We match the rating to your door.
How many years do garage door rollers usually last?
There is no fixed interval. A roller's life depends on its cycle rating and the door's weight; DASMA's experts give 10,000 cycles at 50 pounds as one example for a nylon roller. Replace rollers when they crack, flat-spot, wobble or get loud, and replace them all together so the door runs evenly.
Will a little grease quiet noisy rollers, or do they need replacing?
Lubricating can quiet a dry roller, and Clopay recommends lubricating rollers regularly, but oil does not fix a cracked, flat-spotted or loose wheel. Follow the door maker's care instructions, and replace any wheel that is damaged.
Can the bottom rollers be swapped while the door is up?
Not safely. The bottom rollers sit in the bottom brackets that hold the lift cables, and DASMA says brackets and cables are under tension and belong to a trained technician. We secure or unload the door before we change those rollers; the upper rollers are changed section by section.
Roller Jobs by Neighborhood

Where We Replace Rollers

Dallas, TX

Garage Door Roller Replacement in Dallas →

University Park, TX

Garage Door Roller Replacement in University Park →

Highland Park, TX

Garage Door Roller Replacement in Highland Park →

Preston Hollow, TX

Garage Door Roller Replacement in Preston Hollow →

Bluffview, TX

Garage Door Roller Replacement in Bluffview →

Devonshire, TX

Garage Door Roller Replacement in Devonshire →

North Dallas, TX

Garage Door Roller Replacement in North Dallas →

Lake Highlands, TX

Garage Door Roller Replacement in Lake Highlands →
Contact Us

Reach the Sherry Lane Garage Door Desk

Describe the noise, the stuck spot or the part that snapped, and a technician from our Preston Center office phones you back. Jobs start at the figures on the price list; the number for your own door is settled at the house, before anything comes apart.

Reunion Garage Door Repair Expert of Sherry
5956 Sherry Ln 20th Floor
Dallas, TX 75225

Phone: (469) 264-8319
Email: info@reuniongaragedoorrepairsherry.com
Hours: Open 7 AM to 10 PM, 7 days a week

Get My Free Estimate ☎ Call (469) 264-8319

Your name and number are used only to return your call, as set out in our Privacy Policy.

☎